 |
|
|
|
 |
|
|
|
The TANK ALARM grabs attention with a bright flashing LED and a loud beeper when liquid level is too high or too low. Easy to install. Easy to adjust the depth. Stop overfilled or empty tanks for good!
|
|
|
|
 |
|
|
 |
|
|
Better Liquid Level Control...
- Always on duty because the liquid suction tube is permanently attached to the alarm unit.
- It can go anywhere because its battery powered. No need for power outlets.
- Uninterruptible battery power lasts for years. Lithium battery always included.
- Loud warbling tone cuts through the loudest industrial noise.
- Rugged. Built for rough, wet and corrosive environments.
- Transfer to a new drum is easy: no need to screw in threads or fiddle around with tube connections, just drop it in.
- A functional check is simple - just lift the Drum Alarm out of the drum.
- Protects your pumps from debris with an intake screen.
- Flow indicator built into low level units.
- Safe. 9 volt circuit in a waterproof enclosure.
|
|
|
|
|
|
|
|
|
HIGH LEVEL - POLYPROPYLENE
|
|
|
|
|
Some Chemicals Commonly Used With Gizmo Alarms:
- Aqueous Ammonia (conc.)
- Aqueous solutions to 100°C
- Chromic acid (50%, Rm. Temp)
- Glycolic acid
- Hydrochloric acid (conc.)
- Nitric acid (30%)
- Oils (including waste oils)
- Potassium carbonate (40%)
- Polyester resin (viscous)
- Sodium hydroxide (50%)
- Sulfuric acid
- Sodium Hypochlorite
The following require a PMP flowmeter instead of acrylic:
- Sulfuric Acid 98%
- Lactic acid
CLICK FOR CHEMICAL RESISTANCE CHART
|
|
|
The TANK ALARM guards against overfilling or running empty. Easy to install as its battery powered. No wires, no electricians needed. Lithium batteries last for years.
|
|
|
|
Uninterruptible battery power works through power failures, can't come unplugged, or be defeated. And, because the Drum Alarms don't use any power until alarming, the batteries last for years. Further discussion
|
|
|
 |
|
|
|
|
Its easy to adjust the depth of the Tank Alarms - just loosen the nut on the cord grip and slide the alarm to the correct depth. Adapters for any mounting situation. (2" NPT, flange, bulkhead feedthrough etc.
|
|
|
|
|
|
|
Float is protected inside a pipe with screens on all sides so solids, debris or insects can't ever foul the float. These have even been used on sewage tanks. Bottom screen is removable.
Weatherproof - all NEMA 4X construction.
Many different materials as the situation dictates: PVC, polypropylene, Nylon, PVDF, Stainless steel. Chemical resistance chart.
Any Depth. Standard depths available up to 4 ft. Custom units as long as 20 ft have been made.
|
|
|
 |
|
|
|
 |
|
|
|
SCREEN ON PVC MODEL
|
|
|
|
|
DIFFERENT MODELS
Both models come with a 1" NPT cord grip and 2" NPT threaded bushing.
The PVC tank alarms have a polypropylene float protected in a PVC pipe, and the screen material is polypropylene.
Polypropylene models (ex. THL-PP) have al polypropylene parts including piping.
|
|
|
|
|
PVC MODEL THL-10
|
|
|
|
ORDER
Polypropylene $209
|
|
|
ORDER
PVC $189
|
|
|
|
|
 |
|
|
|
 |
|
|
|
 |
|
|
 |
|
|
|
|
 |
|
|
 |
|
|
|
|
 |
|
|
 |
|
|
|
|
 |
|
 |
|
|
|
 |
|
|
 |
|
|
|
 |
|
|
Questions?
Phone 585-301-0970
email: peter@drumalarm.com
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
