 |
|
|
|
 |
|
|
|
|
 |
|
|
|
|
|
The ALARM PANEL BOX takes inputs from float switches or other contact closures and singals the event with a bright flashing 360-degree beacon LED and very loud buzzer.
|
|
|
|
|
|
Alarm Panel Box Features...
- Flashing beacon light is bright enough to be visible in daylight.
- Loud warbling tone cuts through the loudest industrial noise.
- Rugged. Built for rough, wet and corrosive environments
- Always on duty because it uses uninteruptible battery power.
- Press the button to test.
- Safe. 9 volt circuit in a waterproof (NEMA 4X) box.
- Compact - box measures only 4 x 4 x 2 inches.
- Choice of power. AC power option.
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
|
MULTIPURPOSE ALARM PANEL BOX
|
|
|
|
|
|
THE ALARM PANEL BOX takes a contact closure from sensing devices such as a float switch, reed switch, or limit switch, and turns it into an audio and visual alarm that can't be ignored.
|
|
|
|
|
|
Operation
When your alarm is connected to the the terminal screws, the alarm box is ready to work.
erehthe to accomplish any almost any alarm need:
- When a contact closes the pushbutton illuminates, the beacon flashes, and the audio buzzer sounds. When the button is pushed to silence the audio buzzer, the button illumination goes off, and the beacon light continues to flash as a reminder. When the alarm condition is over, the beacon stops flashing and everything resets automatically for the next alarm.
- A "snooze-alarm" mode repeats the alarming output above every 30 minutes if desired.
- 15 minute delayed ouptut mode. (gives a chance to acknowledge the alarm before a dialer is triggered)
- one-time pulse output. (for a dialer or datalogging)
|
|
|
|
|
|
ALARM BOX CONNECTED TO A TANK ALARM
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
Standard Features
- Pushbutton tests the circuit when unit is not actively alarming.
- Low battery alert.
- Illuminated push-button.
|
|
|
|
|
|
INSIDE VIEW OF AB-2 WITH AC POWER
|
|
|
|
|
|
|
|
Uninterruptible battery power works through power failures, can't come unplugged, or be defeated. Low-power circuitrly allows the lithium-manganese batteries to last for up to 5 years.
Models Available
All models include a 50mA output that can be configured for contact closure or 9V output. Can be set for a 15 minute delay.
AB-1 Battery powered.
AB-2 AC powered. (90-250V)
|
|
|
|
SPECIFICATIONS
- PVC Enclosure rating:........NEMA4X / IP65
- Cord grip:............................P7 (cord diameter0.15-0.32")
- Quiescent current:............. 11 micro-amps
- Contact closure ................. 50mA, 60V
- Current during alarm..........40mA
AB-2 ONLY
- Input power ....................... 90 - 250VAC
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
UK CORD
|
|
|
 |
|
|
EURO CORD
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
AB-2
$149 with standard cord
|
|
|
|
AB-1
$149
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Questions?
Phone 585-301-0970
email: peter@drumalarm.com
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
