DRUM ALARM for low liquid level alerts you with a bright flashing LED and a loud audio alert when liquid level is low. Control drum levels and never run empty again!
Better Liquid Level Control...
Always on duty because the liquid suction tube is permanently attached to the alarm unit.
It can go anywhere because its battery powered. No need for power outlets.
Uninterruptiblebattery power lasts for years. Lithium battery always included.
Loud warbling tone cuts through the loudest industrial noise.
Rugged. Built for rough, wet and corrosive environments.
Transfer to a new drum is easy: no need to screw in threads or fiddle around with tube connections, just drop it in.
A functionalcheck is simple - just lift the Drum Alarm out of the drum.
Protects your pumpsfrom debris with an intake screen.
Flow indicator built into low level units.
Safe. 9 volt circuit in a waterproof enclosure.
No wetted metal parts.
LOW LEVEL ALARM - DLL-55G
The easiest level alarm for feeding from chemical drums and containers. Quick and easy to install - then forget about drum level forever. Simply connect your feed line and drop it in a drum. You're ready to go!
The mounting cap on the Drum Alarm makes it easy to switch to a new drum since you don't have to screw it in, and you don't have to disconnect tubing - it just drops over the bung. The cap keeps debris out of the drum, and it suppresses vapors. Even ammonia drums aren't a problem.
The the feed tube can't be separated from the float switch, so the level alarm is always on duty.
The Drum Alarm includes a removable filter screen to guard your pumps from debris or crystals.
Some Chemicals Commonly Used With Gizmo Alarms:
Aqueous Ammonia (conc.)
Aqueous solutions to 100°C
Chromic acid (50%, Rm. Temp)
Glycolic acid
Hydrochloric acid (conc.)
Nitric acid (30%)
Oils (including waste oils)
Potassium carbonate (40%)
Polyester resin (viscous)
Sodium hydroxide (50%)
Sulfuric acid
Sodium Hypochlorite
The following require a PMP flowmeter instead of acrylic: